Blumat Classic Single Cone

SKU: B10100

In Stock

Automated, Natural Watering

  • Simple & effective watering system for potted plants
  • Each cone delivers approx 75mL/24h
  • Requires no timers or power source
  • Delivers the perfect amount of water
  • Will not over-water
  • Ideal for holidays
  • Suitable for small to medium pots

What is included:

  • 1 Blumat Clay cone
  • 1 Stopper with water feeding tube attached
  • Plant and water bowls not included


The Blumat system supplies plants with water directly through porous clay cones- the surrounding soil, when dry, draws moisture out of the cone. Water then re-fills the cone from the adjacent reservoir.

Prerequisite for correct operation is a lower or equal water level in the reservoir. A limited capacity for transporting water is designed to meet the needs of indoor plants, two different cone sizes allow for a better fit according to the plant's requirements.

Larger plants require more Blumat drippers in order to provide sufficient water. If the system is planned for long term use, it will be necessary to refill the water supply container on a regular basis.

How does Blumat for Houseplants actually work?

First, the Blumat for Houseplants is filled with water and sealed. The suction tube must be free of air, carefully bleed any air bubbles from tube. As the soil dries, the ceramic cone delivers water gradually into the surrounding earth-thereby creating a subpressure within the cone. The subpressure causes water to be sucked from the nearby container of water.
This is the same tensiometer principle as used in the Tropf-Blumat (drip system) However, in the Tropf-Blumat System, the subpressure is used to activate a valve and water is fed under pressure to the plants.

Worth knowing

When functioning correctly, the dispensed water is drawn in through the tube. The water level in the Blumat Classic remains virtually unchanged. Keep the water container topped up. If the water container is empty, the Blumat will also have to be refilled.

Long-term watering: It is best to use opaque containers as this prevents algae growth. In addition, water the plants every 4-6 weeks with a watering can.

Maintenance: Blumat will last longer if it is thoroughly cleaned once a year. Open the Blumat and lay both parts in warm water for about five minutes. Then press the cap on firmly several times under water to flush any impurities out of the tube. Clean inside the cone with a small brush and sand down the outside with sandpaper.


Blumat ceramic watering spikes

By: on 8 November 2019
My experience purchasing a large number of Blumat ceramic water spikes was delightful from start to finish. I needed the product for a uni project. The staff at Eurolux went out of their way to help me, were professional and made every step easy. The water spikes are great quality and work flawlessly. The plants I’m watering are a lot healthier with the spikes than they were when I was using an automatic sprinkler system. I highly recommend this product and company!!!

Write a product review

Others Also Bought

Blumat Digital Moisture Meter
SKU: B50205

Blumat Digital Moisture Meter